ACCO Oviohjain

ACCO-KP2 Acco Oviohjain kulunohjaukseen. koteloimaton       korvaa kaikki aiemmat acco-kp sarjan kortit- lisälaite APS-412 ym.

The ACCO-KP2 module is designed to control a single door within the ACCO or ACCO NET access control system. The module can also be used as a standalone device. Available methods of user authorization include: user code, proximity card (passive transponder such as a card, tag, or other), or DALLAS iButton

The device is characterized by wide configuration options, e.g. in terms of user rights and time schedules for each of them. Over 24,000 events can be registered in the non-volatile module's memory. ACCO-KP2 is provided with 2 OC-type outputs (e.g. to operate two-way and revolving gates, tripods) and 1 relay output for operating an electromagnetic lock or another door activating device. The inputs and outputs of the module can also be used for its cooperation, e.g. with an alarm system.

Programming the ACCO-KP2 and the functions performed by this device differ depending on the system of which the controller is a part. When working in the ACCO system, configuration takes place in the ACCO-SOFT-LT program, and the computer on which it is installed is connected to the controller using the ACCO-USB converter via the RS-485 bus. In the case of the ACCO NET system, the controller connects to the ACCO-NT access control panel via the RS-485 bus. In turn, communication between the control panel, the system server and the computer with the ACCO Soft configuration program is provided with the use of the TCP/IP protocol.

• support for single door with entry and exit authorization
• standalone or ACCO / ACCO NET system operation mode
• 1,024 users (standalone or ACCO system operation mode)
• user rights definition
• possibility to assign the user a code, proximity card (passive transponder in the form of a card, tag, etc.) or DALLAS
• iButton
• support for various terminals enabling the user identification - keypads and proximity card readers
• support for terminals using various transmission protocolsEM Marin (SATEL terminals)
• Wiegand 26, 32, 34, 36, 40, 42, 56
• DALLAS
• Aikautauluja time schedules
  
  • 256 weekly schedules
  • 256 päivittäistä aikataulua  256 daily schedules
  • 256 aikaikkunaa 256 time frames
• loma/juhlapyhä kalenteri holiday access schedules
• pyyhkiytymätön 24576 tapahtuman muisti non-volatile 24,576 event log
• registering information on time attendance control
• suojaus protection against multiple use of the same code / card for access (anti-passback)
• programming means:standalone or ACCO system operation mode - computer with the ACCO-SOFT-LT program
• ACCO NET operation mode - computer with the ACCO Soft program
  non-volatile FLASH settings memory
  firmware update without the necessity to dismantle the modulelocally (single module) – via USB port of the module
  via RS-485 bus (single or many modules) – using the ACCO-USB converter
  remotely in broadcast mode (single or many controllers) - via the ACCO-NT control panel (ACCO NET system operation mode)
• ajastettu oven avaus / lukitus scheduled door locking and unlocking
• programmable limits on number of accesses (only ACCO system operation mode)
• power status control in cooperation with the APS-412 / APS-612 / APS-1412 power supply - connected to the APS connector in the module
• Supply voltage  12 V DC
• Standby mode current consumption  110 mA
• Max. virrankulutus 480 mA
• Paino 110 g
• Maksimikosteus 93±3%
• Mitat  142 x 71 mm
• Releulostulot (resistiivinen kuorma) 8 A / 250 V AC / 30 V DC

Note  The ACCO-KP2 module has been supported as part of the ACCO NET version 1.8 or newer.