PERFECTA 32 IP keskus ja ethernet-tiedonsiirto

PERFECTA 32 IP BO Perfecta-keskus ja ethernet-tiedonsiirtomoduli

• Perfecta 32 IP keskus ja Ethernet-tiedonsiirtomoduli

PERFECTA-IP alarm control panels are designed to protect small and medium-sized premises such as apartments, single-family houses, segments in terraced houses, offices, small businesses etc. They provide protection as required by EN 50131 for Grade 2. The control panels are characterized by simple configuration as well as easy and intuitive operation using keypads . The alarm system can also be controlled remotely using the PERFECTA CONTROL mobile application and keyfobs working in the 433 MHz frequency band (with the INT-RX-S module connected).

An Ethernet communicator is used in the PERFECTA-IP 32 model. It enables using a mobile application with PUSH notification capability, remote system configuration from the PERFECTA Soft program, and event reporting (e.g. to a security agency monitoring station).
The control panel electronics board is provided with 8 hardwired zones and 4 hardwired outputs. Their number can be increased by connecting the INT-E zone expansion modules and INT-O or INT-ORS output expansion modules. This makes expansion of the system possible by adding more detectors, sirens or actuators (to control the garage door, roller shutters/blinds, garden sprinklers).

The control panel enables the system to be divided into two partitions with three arming modes (day, night, full) to select from. Each zone can be assigned to one or both supervised areas.

The system can be configured in two ways: from a computer with PERFECTA Soft program installed (locally - connection via RS-232 (TTL) port, remotely - using data transmission over Ethernet), as well as from a keypad, using key sequences in the service menu.

• compliance with EN 50131 Grade 2
  from 8 to 32 programmable hardwired zones:configuration options: NO, NC, EOL, 2EOL/NO, 2EOL/NC
  support for roller shutter and vibration detectors
  from 4 to 12 programmable hardwired outputs
  2 power outputs on the mainboardbuilt-in Ethernet module (reporting to monitoring station, mobile application, PUSH notifications)
  system division into 2 partitions:3 arming modes in each partition
  option to assign a zone to two partitions
  user-controlled or timer- controlled
  communication bus for connecting keypads (PRF-LCD), expansion modules (INT-E, INT-O, INT-ORS, INT-RX-S)
  system control using:PRF-LCD keypads (up to 4)
  PERFECTA CONTROL mobile application
  keyfobs operating in the 433 MHz band (up to 15) – connection of INT-RX-S module required
  firmware updates available
  passwords:15 user codes
  1 service code
  editable names (of users, partitions, zones, outputs and modules) for easy control and supervision of the system
  8 timers with exceptions setting capability
  memory of 3584 events
  automatic diagnostics of the system main components
  built-in switch-mode power supply:over-current protection
  battery deep discharge protection
  battery charging current control
  programming control panel settings:locally ‒ keypad or computer with PERFECTA Soft program installed, connected to the control panel RS-232 (TTL) port
  remotely ‒ computer with PERFECTA Soft program installed, connecting to the control panel via Ethernet